Representative photo. Please check item description for details.

Bellofram Analog DIN Card Mount Air Regulator 0-150 PSI
(0 review)

Manufacturer: Marsh Bellofram Corporation

Mfg Product Code: 110TE0G150D0000

Weight: 1.0 lb(s)

On Hand: 0

The Bellofram 110TE0G150D0000 Type 3110 electro-pneumatic regulators provide a precision pressure output, which is proportional to the user's electrical command signal. The single closed loop controller has a pressure sensor in the manifold block, which will provide accuracy to +/- 0.50% full scale. The reliable twin solenoid valve system requires no air consumption (conserves air - no constant bleed) at steady state output pressure. The compact card design can be mounted directly to a panel or DIN rail mounted with no sensitivity to vibration, shock or mounting position. 


  • Output Pressure Range: 0-150 PSIG
  • Input Command Signal: 0-10 VDC standard (field selectable 4-20 mA)
  • Flow Rate: 0.7 SCFM @ 180 PSIG Inlet Pressure
  • Accuracy: 0.5% full scale (0.2% linearity, 0.2% repeatability, 0.5% hysteresis)
  • Port Size: 1/8" female NPT inlet, outlet & exhaust
  • Max Supply Pressure: 200 PSIG
  • Supply Voltage: 15-24 VDC @ 80-250 mA
  • Impedance : 10K ohms (voltage input), 250 ohms(current input)
  • Analog Monitor Output: 0-10 VDC
  • Logic Monitor Output: 0 VDC low, 5 VDC high
  • Min Control Volume: 1 cubic inch
  • Filtration: 40 micron built-in
  • Temperature Range: 32 °F to 141 °F
  • Wetted Parts: Aluminum, nickel, Buna-N, 316 SS
  • Electrical Connection: Terminal block
  • Recalibration: Onboard gain, zero, and span pots
  • Mounting: DIN-rail card holder (included) or panel mount

    This combination does not exist.

    Product Datasheets

    Datasheet 1